Bathroom Renovation Council Approval NSW

Do you need council approval to renovate a bathroom or kitchen in NSW? Usually not. See what is exempt, what needs a CDC or DA, and the strata rules.

Deon Du Plessis

10/30/20266 min read

photo of white staircase
photo of white staircase

Usually not. In NSW, replacing or renovating a bathroom or kitchen can be exempt development, which means no council approval, no Development Application (DA) and no Complying Development Certificate (CDC), as long as the work meets the standards in the NSW Codes SEPP. You will probably need approval if you move or remove a wall, work on a heritage item or in a heritage conservation area, or change the structure of the building.

That's the short answer. Below is what the rules actually allow, what triggers approval, how apartments differ, what you still need even when no approval is required, and how to check your own property. It's written from 20 years of designing and documenting renovations for homeowners on Sydney's Northern Beaches.

Do you need council approval to renovate a bathroom in NSW?

In most cases, no. Under section 2.51 of the Codes SEPP, replacing or renovating a bathroom can be exempt development if the relevant standards are met. According to HIA guidance on that section, the following are generally fine without approval:

  • Replacing tiles, vanities, toilets, baths and shower screens

  • New waterproofing and fittings in the same room

  • Relocating a bath, vanity or shower within the bathroom

  • Repainting, new flooring and new lighting

The same guidance sets limits. You will generally need approval if the work:

  • Moves or removes a wall. HIA's reading is that this is not covered by the bathroom and kitchen exemption, even if the wall is non-load-bearing.

  • Reduces a window or door that provides light or ventilation.

  • Affects the structure of the building, such as removing a load-bearing wall. See our guide to load-bearing wall removal in NSW.

  • Changes the building footprint, for example adding an ensuite by extending the house.

HIA's article is a good starting point, and you can read it on the HIA website. Rules and section numbering were updated in 2024, so always confirm against the current Codes SEPP.

Do you need council approval to renovate a kitchen in NSW?

The same logic applies. A like-for-like kitchen renovation, or a new kitchen in the same room, can be exempt development if the standards are met. That covers new cabinetry, benchtops, appliances, splashbacks, flooring, lighting and relocating the sink or cooktop within the room.

Approval typically comes into play when the kitchen renovation is part of something bigger. Opening the kitchen into the living area by removing a wall is the most common trigger, and a load-bearing wall also needs an engineer. Extending the kitchen outwards changes the footprint and needs approval too. See how to renovate without council approval in NSW for the wider picture.

What usually needs approval, and what usually does not?

Usually exempt (no council approval):

  • Like-for-like replacement of fixtures, tiles and cabinetry

  • Relocating fixtures within the same room

  • Waterproofing and re-tiling

  • Flooring, painting and lighting upgrades

Usually needs approval (often a CDC, sometimes a DA):

  • Moving or removing walls, even non-load-bearing ones

  • Removing a load-bearing wall

  • Reducing a window or door that gives light or ventilation

  • Extending the building or adding an ensuite outside the existing footprint

  • Any work on a heritage item or in a heritage conservation area, where exempt development is often restricted

Moving the whole bathroom or kitchen to a different part of the house, with major plumbing relocation, is a grey area. Treat it as likely to need approval and check with a certifier first.

Do you need strata approval for a bathroom or kitchen renovation?

If you live in an apartment, council approval and strata approval are separate questions. Even when council approval is not needed, you usually still need your Owners Corporation's approval. Under NSW strata law, kitchen and bathroom renovations generally count as minor renovations, which are typically approved by a resolution at a general meeting, or by the strata committee if your by-laws delegate that power. Waterproofing is often common property, which makes approval even more important. Check your by-laws and get approval in writing before work starts. Our apartment renovation design page explains how we help.

What do you still need when no council approval is required?

"Exempt" means exempt from council approval. It does not mean exempt from the rules.

  • The Building Code of Australia still applies to the work.

  • Licensed trades. In NSW, plumbing and electrical work must be done by licensed tradespeople. Licensed plumbers lodge a Certificate of Compliance for plumbing work, and wet-area waterproofing should be done by a suitably licensed tradesperson who can give you a compliance certificate. Confirm current requirements on the NSW Fair Trading website.

  • A licensed builder for larger jobs. Residential building work over $5,000 requires a licensed builder or tradesperson. Above $20,000 you also need a full home building contract and the builder must provide Home Building Compensation (home warranty) insurance before work starts.

  • Heritage, flood and bushfire constraints can limit what counts as exempt on your property.

What does a bathroom or kitchen renovation cost?

On the Northern Beaches, bathrooms typically run from about $20,000 to $45,000 and kitchens from about $25,000 to $80,000, depending on layout changes and finishes. If a renovation does need a DA or CDC, approvals commonly add $10,000 to $20,000 or more. That's why designing to stay inside the exempt rules is one of the cheapest savings available. See our Northern Beaches renovation costs guide for the full breakdown, and our guide to building designer costs in NSW for what design and drawings add.

How do you check whether your renovation needs approval?

  1. List exactly what you plan to change. Walls, windows, plumbing locations and any extension are what matter.

  2. Check your property's constraints. Use your council's planning maps or the NSW Planning Portal to see whether the property is a heritage item, in a heritage conservation area, or on bushfire or flood prone land.

  3. If you're in an apartment, read your by-laws and ask your strata manager what category the work falls into.

  4. Ask a certifier or your council to confirm the pathway before you commit to a design or a builder.

  5. Get a designer to check it before design starts. We assess the approval pathway for every project, so you know up front whether your plan is exempt, needs a CDC or needs a DA.

What happens if you renovate without the approval you needed?

Doing work that is not exempt without the required approval is an offence under the Environmental Planning and Assessment Act. You can be fined and ordered to rectify or remove the work, and unapproved building work can cause problems when you sell or refinance. Our complete exempt development guide and our CDC guide explain the risks and the alternatives.

Frequently asked questions

Do I need council approval to renovate a bathroom in NSW?

Usually not. Replacing or renovating a bathroom can be exempt development if the Codes SEPP standards are met. You generally need approval if you move or remove a wall, reduce a window or door that provides light or ventilation, change the structure, or the property is heritage listed or in a conservation area.

Can I move my bathroom plumbing without approval?

Moving a bath, vanity, shower or toilet within the same bathroom can still be exempt. Relocating a bathroom to another part of the house is a bigger change and often needs approval, so check with a certifier first. Plumbing work must always be done by a licensed plumber.

Do I need approval to remove a wall between my kitchen and living room?

Generally yes. Moving or removing a wall is not covered by the kitchen and bathroom exemption, and a load-bearing wall also needs an engineer. This is usually handled through a Complying Development Certificate.

Do I need council approval to renovate a kitchen in NSW?

Usually not for a like-for-like or same-room renovation. You will need approval if the kitchen renovation involves moving walls, extending the building or working on a heritage property.

Do I need strata approval to renovate a bathroom or kitchen in an apartment?

Usually yes, even when council approval is not required. Kitchen and bathroom renovations are generally treated as minor renovations that need approval from the Owners Corporation or strata committee, and waterproofing is often common property. Check your by-laws first.

Do I need a licensed plumber and waterproofer for a bathroom renovation?

Yes. Plumbing and electrical work must be done by licensed tradespeople, and wet-area waterproofing should be done by a suitably licensed tradesperson who can provide a compliance certificate. Always check a tradesperson's licence on the NSW Fair Trading register.

Not sure if your renovation needs approval?

The answer depends on your property and exactly what you plan to change. Book a free 1-hour consult with Beaches Drafting and we'll check the approval pathway, give you a realistic cost range and tell you whether a smaller change would get you what you want for less. You can also see how we help with bathroom renovation design and kitchen renovation design, or browse our renovation FAQ.

Written by Deon Du Plessis, building designer at Beaches Drafting. This page is general information for Northern Beaches homeowners as at 2026 and is not legal or planning advice. Rules, thresholds and section numbering change, and what applies depends on your property. Confirm your approval pathway with your council or an accredited certifier before starting work.